cui .com date 02/15/2012 page 1 of 3 series: sj1-355xng description: 3.5 mm audio jacks features ? low profile design ? switch options include: ? no switch ? tip switch ? tip and ring switch rohs sj1 - 355 x ng switch options 3 = no switch 4 = tip switch 5 = tip and ring switch base number part number key specifications parameter conditions/description min typ max units rated input voltage 12 vdc rated input current 1a contact resistance between terminal and mating plug between terminal in a closed circuit * 50 30 m m insulation resistance at 500 vdc 100 m voltage withstand at 50/60 hz for 1 minute 500 vac insertion/withdrawl force 0.3 3 kg terminal strength any direction for 10 seconds 500 g operating temperature -25 85 c life 5,000 cycles notes: *when measured at a current of less than 100 ma / 1 khz solderability parameter conditions/description min typ max units wave soldering dipped in solder pot for 50.5 seconds at 255 260 265 c
cui .com cui inc series: sj1-355xng description: 3.5 mm audio jacks date 02/15/2012 page 2 of 3 0.197 5.0 5.0 0.197 1.60 (3 plcs) 0.063 0.394 10.0 3.0 0.118 0.197 5.0 10.0 0.394 5.0 0.197 pcb layout top view 5 1 3 4 2 1.00x1.50 (5 plcs) 10.0 0.394 0.472 12.0 0.276 7.00 4.0 0.157 0.3 (typ) 3.600 0.142 7.00 0.276 1.00 0.039 0.138 3.50 0.039 1.00 0.453 11.5 10.5 0.413 5 1 3 4 2 3.0 0.118 1.50 0.059 (2 plcs) mechanical drawing material plating terminal 1 brass tin terminal 2 copper alloy tin terminal 3 copper alloy tin terminal 4 brass tin terminal 5 brass tin plastic pbt model no. sj1-3553ng sj1-3554ng sj1-3555ng schematic 2 1 3 2 1 3 4 2 1 3 4 5 pin 1 sleeve sleeve sleeve 2 tip tip tip 3 ring ring ring 4 np tip switch tip switch 5 np np ring switch units: mm[inches] tolerance: x.x 0.2mm x.xx 0.1mm x.xxx 0.05mm 14 ? 3.5 mating plug
cui inc series: sj1-355xng description: 3.5 mm audio jacks date 02/15/2012 page 3 of 3 cui offers a one (1) year limited warranty. complete warranty information is listed on our website. cui reserves the right to make changes to the product at any time without notice. information provided by cui is believed to b e accurate and reliable. however, no responsibility is assumed by cui for its use, nor for any infringements of patents or other rights of third parties which may result from its use . cui products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. headquarters 20050 sw 112th ave. tualatin, or 97062 800.275.4899 fax 503.612.2383 cui .com techsupport@cui.com rev. description date 1.0 initial release 02/07/2006 1.01 new template applied 02/15/2012 the revision history provided is for informational purposes only and is believed to be accurate. revision history
|
